ISLAND MOUNT RANGE HOOD This manual is made with 100 % recycled paper. Electronic version of this manual is available at: www.cosmoappliances.
Thank You Thank you for your purchase. We know that you have many brands and products to choose from and we are honored to know that you have decided to take one of our products into your home and hope that you enjoy it. Our appliances are designed according to the strictest safety and performance standard for the North American market. We follow the most advanced manufacturing philosophy. Each appliance leaves the factory after thorough quality inspection and testing.
STAINLESS STEEL BAFFLE FILTERS About Your New Filters Stainless Steel Baffle Filters do not need linings or mesh inside of the filters and are completely constructed out of stainless steel. The stainless steel construction allows them to be used again after being cleaned or going through the dishwasher. How do Baffle Filters Work? They function by forcing the grease filled air to quickly and continuously change direction as it passes through the filter.
TABLE OF CONTENTS PARTS DIAGRAM INSTALLATION REQUIREMENTS 04 05 INSTALLATION PROCEDURES 06 OPERATING INSTRUCTIONS 09 MAINTENANCE TROUBLESHOOTING WARRANTY AND SERVICE 10 11 12 3
PARTS DIAGRAM 668ICS 750 / 900 MAIN PARTS Ceiling Mount Upper Support Frame Lower Support Frame Inner Chimney Outer Chimney Blower Assembly Tempered Glass Grease Filters 4
INSTALLATION REQUIREMENTS 24" to 36" 1. Do not install the range hood where there are many open doors or windows.This will cause reduced performance. (Fig. 1) 2. Install the range hood right above the cooktop. The optimal distance between the cooktop and lower edge of the range hood is 24” to 36”. (Fig. 2) 3. In order to get optimal performance, do not over extend the exhaust pipe and avoid unnecessary bending. (Fig. 3) 4. The air outlet must be connected to chimney flues or combustion gas ducts.
INSTALLATION PROCEDURES CAUTION: HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR PROTECTIVE GLOVES WHENEVER IT IS NECESSARY TO REMOVE ANY PARTS FOR INSTALLING, CLEANING OR SERVICING. Step 1: 24" to 36" This Island Range Hood has an adjustable height. Measure from the ceiling to a height of 24” to 36” above your cooktop. Write down this measurement, this is the height (how tall) you will need to adjust the Island Range Hood.
Step 4: Using the Ceiling Mount as a guide drill 4 holes (8mm or 5/16 drill bit) into the ceiling area where you will be mounting your range hood. Fill the holes with the provided anchors. Screw the Ceiling Mount securely into place. Anchor Screws Anchors Note: In some cases the Ceiling Mount may already be attached to the Upper Support Frame Ceiling Mount Ceiling Mount Step 5: Upper Support Frame Align the 4 pieces of the Upper Support Frame to the holes on the Ceiling Mount.
Step 9: Inner Chimney Back Ceiling Mount Take the back piece of the Inner Chimney, align and securely screw into the sides of the Ceiling mount. Now take the front piece of the Inner Chimney, align and securely screw into the side of the Ceiling mount. Inner Chimney Front Now screw the Back of the Inner Chimney and the Front of the Inner Chimney together on each side (where they meet).
OPERATING INSTRUCTIONS A B C D Soft Touch Controls 668ICS 750 / 900 A. Timer Button When unit is turned on press to increase timer minutes up to 59 minutes. B. Light Button. Press to turn lights on / off C. Fan Speed Button When unit is turned on press to change fan speed. D. Power Button Press to turn unit on / off. How to Set your Time The clock on this Range Hood is set to military time. It cannot be set to a 12 hour format. 1. Press Power Button - The display panel will illuminate. 2.
MAINTENANCE CAUTION: NEVER PUT YOUR HAND INSIDE OF THE UNIT WHILE ITS OPERATING. FOR THE BEST PERFORMANCE CLEAN YOUR RANGE HOOD REGULARLY. CLEANING 1. Use only mild soap or cleaning solutions to clean the range hoods outer surface. Dry surfaces using a soft cloth. 2. Stainless Steel cleaner may be used on the external surface. 3. Cleaning the Baffle Filters: For daily cleaning, use hot, soapy water and a soft cloth. Wipe dry and finish with a damp micro-fiber cloth.
TROUBLESHOOTING CAUTION: ALWAYS UNPLUG UNIT FROM POWER BEFORE SERVICING PROBLEM SOLUTION TOOLS My range hood is noisy. A. Check inside the range hood for any loose debris and remove. Phillips Screwdriver My range hood has poor performance.. A. The range hood and cooktop are too far away from each other. Optimal distance is 24” to 36” Phillips Screwdriver B. There are too many open windows or doors in the area. Close some doors or windows. C. The motor performance has decreased due to wear.
WARRANTY AND SERVICE Limited Warranty This unit comes with 1 Year Manufacturer’s Part Warranty. Within 1 year after date of receiving the product, Cosmo will replace any functional parts that are defective. Functional parts are those components/parts that are critical to the performance of the product’s essential function. Non-functional parts are those that are a cosmetic feature of the product such as knobs, grates, other metal bodies/surfaces, etc. A.