Installation Guide

4. Screw the regulator cap back into the regulator and reattach the regulator to the



STEP 2 - CHANGE BURNER ORIFICES

IMPORTANT:

the Burner Chart earlier in this section.

NOTE:

possibility that some may not be replaced.

1. Remove the burner grates, burner caps and burner heads.

2. 

a 

Triple Ring Burner

5 



Semi-Rapid Burner

Rapid Burner

1  Each

3. 

4. Replace the burner bases, heads, caps and top grates. Make sure burner caps are

properly seated on the burner head.