Installation Guide

Advance Preparation

Tools and Parts

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed here.

■ Tape measure

■ Phillips

screwdriver

■ Flat blade screwdriver

■ 1/8” flat blade screwdriver

■ Level

■ Hand or electric drill

■ Wrench or pliers

■ Pipe wrench

■ 1 5/16" combination wrench

■ Marker or pencil

■ Pipe-joint compound resistant to LP gas

■ 3/16” (4.8 mm) carbide-tipped masonry drill

bit (for concrete/ceramic floors)

■ Noncorrosive leak-detection solution

FOR LP/NATURAL GAS CONVERSIONS:

■ 1/2" Combination wrench

■ 1/4" (6 mm) nut driver

■ 9/32" (7 mm) nut driver

■ Masking tape

PARTS SUPPLIED:

Check that

all parts are included.

■ 5 - Burner caps

■ 3 - Burner grates

■

2 - Oven racks

■ Anti-tip Device (explained on page 21)

■ 2 plastic anchors

■ 2 screws

The anti-tip device must be securely

mounted to the wall.

PARTS NEEDED

Check local codes and consult gas supplier.

Check existing gas supply and electrical

supply. See “Electrical Requirements” and

“Gas Supply Requirements” sections.

■

1 - Baking Tray

4 adjustable legs / rubber pegs

■

Gas Pressure Regulator

■