Installation Guide
• Burner Caps
− To clean the burner caps, lift the burner cap off the burner head. Clean heavy soils with
an absorbent cloth.
− Rinse with a clean, damp cloth and immediately thoroughly dry including the bottom
and inside of the cap.
− Do not use harsh abrasive cleaners. They can scratch the cap.
− DO NOT PUT BURNER UNITS IN THE DISHWASHER
• Burner Heads
− The holes in the burners of your appliance MUST be kept clean at all times for proper
ignition and a complete, even flame. Remove any food from between the burner slots
using a small nonabrasive brush like a toothbrush and afterwards wipe using a damp
cloth.
− To remove deposits from the burner cavities, remove the cap and separate the two parts.
Clean the burner holes routinely with a small gauge wire or needle and especially after
bad spillovers which could clog these holes.
− After cleaning, put the two parts back together and return them correctly to their position,
making sure they are seated and level.
− DO NOT PUT BURNER UNITS IN THE DISHWASHER
• Stainless Steel
− Clean stainless steel with hot, soapy water and a dishcloth. Rinse with clean water and a
cloth.
− Do not use cleaners with high concentrations of chlorides or chlorines. Do not use harsh
scrubbing cleaners. Only use kitchen cleaners that are especially made for cleaning
stainless steel.
• Inside O
ven
− This appliance does NOT have a self-cleaning feature.
− DO NOT attempt to clean the appliance whenever the oven is still hot.
− Use an appropriate cleaning product designed specifically to clean the inside of ovens.
− IMPORTANT: Always follow label instructions on cleaning products.
44