Installation Guide

• Do not repair or replace any part of the appliance unless specifically recommended in the
manuals. All other servicing should be done only by a qualified technician. This may reduce the risk
of personal injury and damage to the appliance.
•
Proper Installation – The range, when installed, must be electrically grounded in accordance
with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70.
In Canada, the range must be electrically grounded in accordance with Canadian Electrical Code. Be
sure the range is properly installed and grounded by a qualified technician.
•
Disconnect power before servicing.
•
Never modify or alter the construction of the appliance by removing panels, wire covers or any
other part of the product.
•
Injuries may result from the misuse of appliance doors or drawers such as stepping, leaning, or
sitting on the doors or drawers.
•
Overhead range hoods, which operate by blowing a downward air flow on to a range, shall not
be used in conjunction with gas ranges other than when the hood and range have been designed,
tested and listed by an independent test laboratory for use in combination with each other.
•
Ensure that the room is well ventilated by keeping the air intakes open and in good working
order or by installing an extractor hood with discharge pipe. If the appliance is used intensively for a
long time the effectiveness of the ventilation will have to be increased, for example by opening a
window or increasing the power of any electric extractor fan.
•
Flammable materials should not be stored on the appliance or near surface units. This includes
paper, plastic and cloth items, such as cookbooks, plastic ware and towels, as well as flammable
liquids. Do not store explosives, such as aerosol cans, on or near the appliance. Flammable
materials may explode and result in fire or property damage.
5