Installation Guide

Water will not shut off
completely
Cartridge needs to be
replaced.
Unscrew the lever on
the handle by hand.
Loosen set screw with
a hex wrench (2.5 mm).
Remove the handle
and unscrew USJNDBQ
by hand. Un-
screw the locking nut
with an adjustable
wrench. Replace ce-
ramic disc cartridge.
Lea
king between spray
h
ead and the hose
Spray head may be
loose or washer is not
seated correctly in the
hose connection
Tighten the spray head
by hand until snug.
Make sure the washer
is seated correctly
Troubleshooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
P R
O B L E M C A U S E A C T I O N
Leakage under the
handle.
Locking nut has
come loose .
Unscrew the lever on the
handle by hand. Loosen
set screw with a hex
wrench (2.5 mm). Re-
move the handle and
unscrew USJNDBQ
by hand. Tighten locking
nut with an adjustable
wrench

14