Installation Guide

Make sure you have all necessary parts by checking the diagram and
parts list. If any part is missing or damaged, please contact Cosmo
Appliances at 1-888-784-3108
Pre-drilled hole size requirement: 1-3/8” - 1-1/2”
Max countertop thickness without deck plate: 1-3/8”
Turn off the hot and cold water supply at the angle stops and turn on the
old faucet to release any built up pressure. Remove existing faucet.
Clean the sink of countertop to remove and debris, plumber's putty, and
silicone.
Place a bucket under the angle stops. Turn on to clear any debris prior to
installing new plumbing. Shut off angle stops.