Installation Guide

Step 1
Remove the plastic holder, silicone ring, metal ring, and nut from the shank.
Insert faucet through the top hole of installation site. Attach Plas-
tic Holder (A), Silicone Ring (B), Metal Ring (C) under the faucet.
Use the Nut (D) provided to hold sink and hardware into place.
Once tightened, use the Screws (E) located on the nut to firmly
secure into place.
8
A. Plastic Holder
B. Silicone Ring
C. Metal Ring
D. Nut
E. Screws