Use and Care Manual

21
TROUBLESHOOTING
Phillips
Screwdriver
My range hood has
poor performance.
Phillips
Screwdriver
My range hood
shakes.
Phillips
Screwdriver
The motor no longer
runs.
Phillips
Screwdriver
Light bulbs went out. Phillips
Screwdriver
A. The installation is not secure.
Check again and make sure
the installation hardware is
securely mounted.
B. The fan is broken or not
balanced. Realign or replace
fan.
C. The motor is loose. Check
and make sure the motor is
solidly mounted to the unit.
PROBLEM
SOLUTION
TOOLS
My range hood is
noisy.
A.
CAUTION: Always unplug unit from power before servicing.
The range hood and cooktop
are too far away from each
other. Optimal distance is 24"
to 36".
There are too many open
windows or doors in the area.
Close some doors or windows.
The motor performance has
decreased due to wear.
Replace motor.
Check and make sure the
tape holding down the
damper flaps at the vent hole
are removed before use.
A.
B.
C.
D.
A. Replace with a new LED lamp.
A. Replace control panel or
circuit board.
Replace with new motor
assembly.
B.
Check inside the range hood
for any loose debris and
remove it.