Owner Manual

MAINTENANCE

CAUTION: NEVER PUT YOUR HAND INSIDE OF THE UNIT WHILE ITS OPERATING.

FOR THE BEST PERFORMANCE CLEAN YOUR RANGE HOOD REGULARLY.

CLEANING

1. Use only mild soap or cleaning solutions to clean the range hoods

outer surface. Dry surfaces using a soft cloth.

2. Stainless Steel cleaner may be used on the external surface.

3. Cleaning the Baffle Filters: For daily cleaning, use hot, soapy

water and a soft cloth. Wipe dry and finish with a damp micro-fiber

cloth. Baffle filters can also be cleaned in the dishwasher.

4. Clean the Range Hood assembly once every 6 months.

5. DO NOT clean the motor or electrical components with water or any

other liquid

REPLACING LIGHT BULBS

CAUTION: LAMP UNIT MAY BE HOT! WAIT UNTIL THE UNIT IS COOL. BEFORE

ATTEMPTING TO REPLACE THE LIGHT BULBS MAKE SURE THE UNIT IS POWERED OFF AND

UNPLUGGED.

Note: Bulb Size GU10.

1. Remove the baffle filters

2. Reach behind the bulb, twist counter clockwise and push the bulb out of the panel.

3. Plug in new bulb and twist clockwise to lock into place.

5. Reinstall the baffle filters.