Installation Manual

25
1. Apply pipe-joint compound made for use with LP gas to all pipe thread
connections.
2. Using a pipe wrench to tighten, connect the gas supply to the range.
CONVERT TO LP GAS (OPTIONAL)
This range is shipped from the factory set up to use natural gas. It can be
converted to use LP gas by a qualified service technician.
The LP conversion kit is sold separately. The conversion to LP requires all
surface burner orifices and, if applicable, gas oven orifices to be changed. In
addition, the nozzle on the gas pressure regulator needs to be reversed.
See "GAS CONVERSION" section for detailed instructions.
NOTE: All replaced orifices must be left with the consumer, including the
instructions and retrofit sizes and orifice indication.
a
b
c
d
Gas Line from Range
Washer (provided)
Adapter (provided)
Gas Pressure Regulator
(provided)
a
b
c
d