Installation Manual

36
Convert Oven Broil Burner
1. Unscrew Front Bracket
Locate the bracket at the front of
the broiler. Remove the screw.
2. Remove the Burner
Carefully slide the burner forward
and out of the socket, without
severing or damaging the wire
attached. Carefully lay the
burner down as shown in the
image to the right.
3. Change the Burner Orifice
With the burner out of the way
look for the orifice as shown.
Continue with changing the
orifice.
Complete Gas Conversion
1. Open shutoff valve in the gas supply line.
2. Plug in cooktop or reconnect power.
• Refer to "Gas Connection" section in the "Installation Instructions" section
for proper connection of the range to the gas supply.
• Refer to "Complete Connection" section to complete this procedure.
• Refer to the "Adjust Flame Height" section for burner flame adjustments.
IMPORTANT: You may have to adjust the low setting for each cooktop
burner.