Installation Manual
6
Backsplash with screws Anti-tip bracket with screws
(COS-965AGC only)
Anti-tip wall anchor hooks with
screws (COS-965AGFC only)
Gas pressure regulator Gas pipe adapter with washers
Power cord with strain relief
(Pre-installed for COS-965AGC)
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the required tools and parts before starting installation. Read and
follow the instructions provided with any tools listed here.
Tools Needed
• Tape measure
• Flat-blade screwdriver
• Phillips screwdriver
• Level
• Drill
• Wrench or pliers
• Pipe wrench
• 15/16" (2.4 cm) combination
wrench
• 1/8" (3.2 mm) drill bit (for wood
floors)
• Marker or pencil
• Pipe-joint compound resistant
to Propane gas
• 3/16" (4.8 mm) carbide-tipped
masonry drill bit (for
concrete/ceramic floors)
• Noncorrosive leak-detection
solution
For Propane/Natural Gas
Conversions
• 1/2" (1.3 cm) combination
wrench
• 1/4" (6 mm) nut drive
• 9/32" (7 mm) nut drive
• Masking tape
Parts Supplied