User Manual

1.) Display
Door display control
A.) When the refrigerator is powered on for the first time, full display will last for 3 seconds, the start-up tone will
sound and then enter into the normal operation display. When the power is on for the first time, the set temperature
for the refrigerating chamber and freezing chamber is 39 Fahrenheit degrees and 0 Fahrenheit degrees respectively,
ice maker opens by default, and the default temperature unit is Fahrenheit.
B.) The set temperature of the refrigerating chamber shows on the display. If there is an error, an error code will be
displayed (cyclic display).
C.) Under normal circumstances, the display will be locked after 30 seconds without door opening and button
operation, and the display screen will turn off after 30 seconds in the locking state; when the display screen does not
light up, the display screen will normally light up when a button/function is being used; when there is a fault of "fault
code visible type", the display will light up and turn off after 30 seconds.
Ice Making display control
A.) When the refrigerator is powered on for the first time, full display will last for 3 seconds, then enter the normal
operation display; when the power is on for the first time, Water dispensing the default.
B.) When the communication between the distributor board and the ice machine board fails, the indicator lights of
Cubed Ice mode, Water mode and Crushed Ice mode will flash at the same time. When there Is no fault, the current
state of distributor board will be displayed
2.) Lock / Unlock
A.) In the non-lock state, keep pressing the lock button for 3 seconds to enter the lock state, the buzzer for lock shall
sound and then the lock icon shall light up.
B.) In the lock state, keep pressing the lock button for 3 seconds to enter the lock state, the buzzer for unlock shall
sound and then the lock Icon shall go out.
C.) It shall automatically enter the lock state when there is no button operation after 30 seconds.
D.) The alarm sound release operation can be carried out in the lock state while all other button operations must be
carried out in the nonalock state. An error beep prompt shall be given in case of operation In the lock state.
3.) Mode setting
∙ Long press the Refrigerating button for 3 seconds to set / cancel the quick refrigerating mode.
∙ Long press the Freezing button for 3 seconds to set / cancel the quick freezing mode.
∙ Short press the ENERGY SAVING button to set / cancel the ENERGY SAVING mode.
When the quick refrigerating mode is set, the refrigerating shall be automatically set to 1°C / 34°F; when the quick
refrigerating mode is exited, the set temperature in the refrigerating chamber will be automatically restored to the set
temperature before enabling quick refrigerating mode.
When the quick freezing mode is set, the freezing shall be automatically set to -22°C / -7°F; when the quick freezing
mode is exited, the set temperature in the freezing chamber will be automatically restored to the set temperature
before the enabling quick freezing mode.
When the ENERGY SAVING mode is set, the refrigerating chamber shall be automatically set to 7°C / 44°F, while
the freezing chamber shall be automatically set to -14°C / 7°F. When the ENERGY SAVING mode is exited, the set
temperature in the refrigerating and freezing chambers are automatically restored to the set temperature before
enabling ENERGY SAVING mode. When the ENERGY SAVING mode setting is valid, the ENERGY SAVING
indicator light will turn on; if the setting is invalid, the indicator light will turn off.
If the refrigerator is powered on, it will remember the quick refrigerating/quick freezing mode, and the chambers
will be restored to the default temperature after exiting.
4.) Refrigerating Chamber temperature setting
Press the refrigerating temperature adjustment button to select the refrigerating temperature zone, and then press
the refrigerating temperature adjustment button to adjust the refrigerating chamber temperature. Each time the
refrigerating chamber button is pressed, the temperature shall drop 1°C / 1°F; after the temperature reaches 1°C /
34°F, press the refrigerating button again and the refrigerating chamber setting range is 1~7°C / 34~44°F; the
setting is valid after locking.
14
OPERATION