User Manual

Step 8:
Take the back piece of the Inner Chimney, align
and securely screw into the sides of the Ceiling
mount.
Now take the front piece of the Inner Chimney,
align and securely screw into the sides of the
Ceiling mount.
Now connect the Back of the Inner Chimney and
the Front of the Inner Chimney together on each
side (where they meet).
Step 9:
Take the Back of the Outer Chimney and the
Front of the Outer Chimney and connect them
together as shown in the picture. Now screw
the Back of the Outer Chimney and the
Front of the Outer Chimney together on each
side (where they meet).
9
Step 10:
Remove Filters to access the
bottom of the Blower Assembly.
From the bottom of the Island
Range Hood, secure the Outer
Chimney (Back and Front Pieces)
by screwing them into the Blower
Assembly.
Inner Chimney Back
Inner Chimney Front
Ceiling Mount
Outer Chimney Front
Outer Chimney Back
Side View
Side View
Blower Assembly
Step 11:
Reinstall the Baffle Filters. Align the filter
pins with the holes
under the range hood.
Gently pull on filter lock. Put the filter in
place and release lock.
Lock
Filter Pins
Holes