SE350 User Manual

16
EN
3-1-3-5. Power saving load
Model
Input Saving Power
Saving Wake up
SE200 / SE350
<10VA
>15VA
SE400
<20A
>30 VA
Table 14. SE series power saving load
3-2. Rear Panel Introduction
Figure 8. SE series rear panel view
Model
SE Series Rear Panel

DC Input Terminal

Green Terminal

Remote Port (RJ-11)

Chassis Ground
Table 15. SE series rear panel introduction
3-2-1. DC Input Terminal 
The DC cables should be as short as possible (less than 6 feet / 1.8
meters ideally)
The size of the cable should be thick enough to limit the voltage
drop to less than 2% when carrying the maximum input current to
prevent frequent low-input voltage warnings, and shutdown.
The following sizes of cables and fuses are recommended distance
(<6 ft.) between the batteries and the inverter.
Model
Wire AWG
Inline fuse
SE200-112 / 212
#10
≧30 A
SE200-124 / 224
#14
≧15 A
SE350-112 / 212
#8
≧50A