SE350 User Manual

2
EN
1-2. Other Safety Notes
 Upon receipt, examine the carton box for damage. If you have
found any damage on the carton box please notify the company
you purchased this unit from.
 Do not operate near water or in excessive humidity.
 Do not open or disassemble the inverter, and warranty may be
voided.
 The DC side connections should be firm and tight.
 Grounding: Reliable grounding should be maintained.
 Do not drop a metal tool on the battery. The resulting spark or
short-circuit on the battery or on the other electrical part may
cause an explosion.
 Install the inverter in a well-ventilated area. Do not block the air
vents at the front AC output side, or the air exhausts at the rear
DC input side.
 Wiring: Adequate input power must be supplied to the inverter for
proper use; correct wiring sizes must be ensured.
 Mount the inverter such that the fan axis is horizontal.
 Do not operate the inverter close to combustible gas or open fire.
 Do not operate appliances that may feed power back into the
inverter.
 The inverter should be operated in an ambient temperature
range：-20℃ to 60℃.
Otherwise the output efficiency may be affected. Air flow to the
inverter must not be blocked.