SL2000-112 Manual

11
3-4. Mounting Instruction
3-4-1. Wall Mount ( For Marine )
Step 1. Use the screws to mount the Drip shield on the wall.
Step 2. Use the screws to mount the product under the Drip shield. Please make sure the height from the
ground to product at least 70 cm.
Fig. 7 ： Wall mount step 1 Fig. 8 ： Wall mount step 2
3-4-2. Ceiling Mount ( For Vehicle and Marine )
Use the screws to mount the product on the wall, and the product mounting requirement is as follow:
a. The mounting height from the ground to product requires at least 70 cm.
b. The bulkhead size requires at least 20 cm clearance each side of the inverter.
Fig. 9 ： Ceiling mount