SL2000-112 Manual

4-2-2. Charger Mode

When external AC power comes available, the transfer relay switches on. See Fig. 13.. The batteries are being

recharged now. (If only one phase AC input is available, please connect to IN1 and ACN-IN)

Fig. 13

：

Charger mode

4-2-3. Power Sharing Mode

If the available power at the AC-input is limited, and the load connected to the AC output load increases, the

external AC circuit breaker may trip accordingly. To avoid this, SL series can automatically reduce the battery

charger output, and thus the AC power consumption. This Power sharing feature constantly senses the

incoming AC current which is used to supply both the battery charger and the appliances connected to the AC

output load.

The Power Sharing level should be set to match the value of the external circuit breaker, which protects the

incoming AC power.