SL2000-112 Manual

18
Fig. 14 ： Power Sharing Mode I
Example:
In Fig.14, Input AC current level is set to a 20 Amps while the AC output loads consume a total of 10Amps. This
means that only 20 – 10 = 10 Amps is left over for charging.
The input AC current level can be set only by remote control. When the total connected AC load reaches the
level of the Power Sharing setting (20A), there will be no power left over to charge the battery. This means that
the charge current of the unit will be reduced to 0A. See Fig.15.
Fig. 15 ： Power Sharing Mode II