Specifications

4
87D0058
SB50HB Series Woodburning Fireplace
1. Read these instructions entirely before beginning any part of the installation. Save these instructions
for any future repairs.
. Use these instructions as a guide during the installation of the fireplace.
3. Be sure these instructions become the property of and are reviewed by all future users of this fireplace
to encourage proper operation and maintenance.
4. All the parts used with this fireplace system must be installed in accordance with these installation
instructions. Failure to do so may be hazardous and will void the warranty.
5. This fireplace and accessories should not be altered in any way that is not specifically recommended
in this manual.
6. Refer to your local building code for local requirements pertaining to installation of factory-built
fireplaces. Fireplaces are intended for installation and use according to standard NFPA No.11 of
the National Fire Protection Association.
7. This fireplace must not be installed with a masonry flue.
8. This fireplace and chimney should not be used for venting a wood or coal burning heater or fireplace
insert.

The fireplace is designed to sit directly on a combustible floor. The fireplace must be installed with
clearances to combustible building materials specified in this manual. Only parts manufactured
by MHSC and labeled for use with the fireplace should be used in the installation of this fireplace
except for special roof flashings that may be fabricated locally. The use of improper parts in the
installation can be hazardous and voids the warranty offered by MHSC.
This fireplace is designed to burn wood. This fireplace is not designed to burn coal, unplumbed
liquid fuels, unplumbed gaseous fuels or household refuse. Any attempt to burn these fuels in
the fireplace can be hazardous.
Failure to heed usage warnings may cause a fire hazard and will void the Warranty. This
fireplace is intended for supplemental heating only and is not intended for use as a primary
heating system. For use with Solid Wood Fuel, UL Classified Processed Solid Fuel Fire Logs,
or Certified Decorative Gas Appliance.


Improper installation or use of this fireplace will void the warranty and can cause:
1. Damage to the fireplace from overheating.
. Hazardous temperatures to develop on combustible materials adjacent to the fireplace
or chimney.
3. The emission of smoke, sparks or hazardous gases into the dwelling.
4. Leakage of rain water into the dwelling.
