Specifications
87D0058
7
SB50HB Series Woodburning Fireplace
5956O”
5856O”
FP2217
SB6000 res install
Chimney Cap
Roof Flashing
Chimney Section
Maintain ” Min. Air
space between Chimney
and Combustibles
Flexible Duct
Type FP-4-U
Combustion Air
Assembly
FP17
Nail to Framing
Members
Galvanized Metal Strip
Do not restirict
side air inlet vents with sur-
round or trim materials
Storm
Collar
Flue Outlet Height to Floor
18’ = Min. Height (No offsets)
4’ = Min. Height ( 30° Elbows)
30’ = Min. Height (4 30° Elbows)
86’ = Max. Height (Chimney Support
every 5’)
If Model WSB60 glass doors are to be used, noncombustible trim attached to the face
of the fireplace must not extend over the screen cover at the top of the firebox opening. The
screen cover will have to be removed before Model WSB60 glass doors can be installed. Non-
combustible trim must not extend over each side of the fireplace into the firebox opening to
avoid interference with installation of the Model WSB60 glass doors.
Floor
Figure 3