Specifications
8
87D0058
SB50HB Series Woodburning Fireplace
This fireplace does not weigh more than large pieces of furniture and can normally be located
near a load bearing wall without requiring additional foundations or supports. If however, the
fireplace is to be trimmed with a heavy stone or brick facing and hearth extension, be sure the
supporting structure is adequate.
Figures 4 and 5 provide dimensional details of the fireplace, required spacing to combustible
walls, and some suggested fireplace locations. When selecting a location, choose one that is
away from frequently opened doors, central heat outlets or returns, or other places where air
movements may disturb the airflow around the fireplace. Air turbulence near the fireplace may
cause smoke to spill out of the fireplace opening.
6956M” Min.
59
56O”
1956M”
MIn.
98” Min.
19
56M
”
Min.
24"
Min.
156O”
Air Space
Clearance
30”
Min.
FP2219
SB6000 framing
Figure 4
Screened Opening
FP19
&0
FIREPLACELOCATION
Figure 5
Full Protection
Corner
Flush
FP0