Datasheet

Part Number:
CL-LC2-SMD-yy
Part Number:
CL-LCSC-SMD-yy
Part Number:
CL-LCST-SMD-yy
 Built to exceed industry standards
 Segmented boot for bend strain relief
 Corning Glass
 UPC—Ultra Polished Connectors
 Insertion loss and reflectance on all connectors are tested for optimum performance guarantee
 2mm Yellow Zipcord jacket with aramid yarn strength members
 Factory terminated resulting in uncompromised performance compared to field terminated cables
 Lifetime Performance Warranty
 Yellow Jacket
Stock Cables
Part Number:
ST2-SMD-yy
FIBER CABLES
Single-Mode
A typical single mode optical
fiber has a core diameter
between 8 and 10 µm and a
cladding diameter of
125 µm. There are a num-
ber of special types of single
-mode optical fiber which
have been chemically or
physically altered to give
special properties, such as
dispersion-shifted fiber and
nonzero dispersion-shifted
fiber. Data rates are limited
by polarization mode disper-
sion and chromatic disper-
sion.
In 2005, data rates of up to
10 gigabits per second were
possible at distances of over
80 km (50 mi) with commer-
cially available transceivers.
By using optical amplifiers
and dispersion-
compensating devices, state
-of-the-art DWDM optical
systems can span thou-
sands of kilometers at 10
Gbit/s, and several hundred
kilometers at 40 Gbit/s.
Part Number:
STSC-SMD-yy
Part Number:
SC2-SMD-yy
LC to LC
LC to SC
LC to ST
SC to SC
SC to ST
ST to ST
LC / SC / ST
www.cptechusa.com ◦ [phone]
9
NEW Lengths!
yy = Length (Meters)
01 (1 m), 02 (2 m), 03 (3 m), 04 (4 m), 05 (5 m), 06 (6 m), 07 (7 m), 08 (8 m), 09 (9 m), 10 (10 m), 15 (50FT), 20 (20 m), 30 (100FT)