Technical data

Chapter 6 Human Machine Interface
51
LCD screen will display different mode interfaces based
on the operation modes of the inverter. There are four
operation modes: startup system check mode (as shown in
Figure 6-2), stand-by mode (as shown in Figure 6-3), normal
operation mode (as shown in Figure 6-4) and fault mode (as
shown in Figure 6-5).
The default indication interface mainly indicates PV
voltage, PV current, grid voltage, generation power, instant
generated power and time information under normal
operation.
LCD screen changes into fault indication interface and
display the present fault information automatically when the
inverter is in fault mode.
6.3.2 Main operation interface
LCD screen displays “default indication interface” when
the inverter is in operation mode. Press the ESC key in this
interface to escape the default interface and enter the main
operation interface. The main operation interface is shown in
Figure 6-6.
Figure 6-6 Contents indicated on the main operation interface
1 OP. Info
2 Alarm
3 History
→4 Setting