Technical data

Chapter 3 Installation

bolts & nuts pairs for backup use)

M5 nut 2

for grounding wire (1 nut

for backup use)

Ring terminal 1 for grounding wire

Cord end terminals 20

16 for input wires, 3 for

output wires, 1 for neutral

wire (optional)

RJ45 connecters 4 for communication cables

Red wire 1

for inverter with 1 MPPT

working alone

Black wire 1

for inverter with 1 MPPT

working alone

3.1 Basic requirements

9 Check and make sure that the ambient temperature of

the installation location is -25°C ~ +60°C;

9 Make sure that the power grid voltage is within normal

range;

9 Permission of grid connection has been granted by the

local electric power authority;

9 Installation personnel must be qualified electricians or

people who have received professional training;

WARNING:

Do not install the inverter under direct sunlight exposure to

avoid reducing conversion efficiency caused by excessively

high internal temperature of the machine.