Technical data

Chapter 3 Installation
22
(b) Insert the cables through steel conduits and strip
the skin 0.4 inch off the cables as shown in Figure
3-10:
Figure 3-10 Diagram for wire stripping of DC input
(c) Crimp the terminal as shown in Figure 3-11:
Figure 3-11 Diagram for terminal crimping of DC input
(d) The order of wire connection from left to right is
PV1-, PV1+, PV2-, PV2+. Connect the PV1- and
PV2- to the corresponding fuse socket of the
negative pole and connect the PV1+ and PV2+ to
the corresponding fuse socket of the positive pole
with M5×12 bolts (4 PCS in total) as shown in
Figure 3-12: