Technical data

Chapter 3 Installation
26
accessory kit as shown in Figure 3-17:
Figure 3-17 Diagram for terminal crimping of grounding conductor
(c) Connect the Gnd wire with a M5 nut at the marked
place on the lower right side of the Wiring box, as
shown in Figure 3-18:
Figure 3-18 Diagram for wire connection of AC output and Grounding
3.3.3 Communication connection
There are two RS485 signal ports on the inverter.
Shielded cables should be used for communication cables
with the maximum length of 3280 feet.