Technical data

Chapter 5 Human Machine Interface
46
TotalTag” menu.
Figure 5-10 History menu and submenu
5.3.6 System setup
Move the cursor to “4 Setting” in the main interface.
Press ENTER
to set the current system parameters, as
shown in Figure 5-11. There are 5 submenus in “4 Setting” :
“1 ON/OFF”, “2 Language”, “3 Buzzer”, “4 SysTime” and “5
Commun.”.
(1) The inverter can be started and shut down with “1
ON/OFF” menu. Move the cursor to “ON” and press ENTER
, “ON State” will then be indicated at the bottom of LCD