Technical data

Chapter 5 Human Machine Interface

screen ; move the cursor to “OFF” and press ENTER ,

then “OFF State” will be indicated as well. The inverter will

stand by instead of working normally if the startup conditions

are not satisfied even “ON” is selected. The inverter will be

shut down immediately if “OFF” is selected in any cases.

(2) Two languages, i.e. English and Chinese are

available in “2 Language” menu.

(3) Key beep and fault beep can be set mute/unmute in

“3 Buzzer” menu. “Key beep” and “Alarm beep” can be

shifted by pressing PAGEUP

and PAGEDOWN . Shift

between “Enable” and “Disable” by pressing Left

and

Right

if the cursor is on the “Key beep”. Complete the

setup by pressing ENTER

. Similarly, the fault beep can

be set up as well.

(4) Set up the system date and time with “4 SysTime”

menu (These parameters are of critical importance and will

be used in history information). Select year, month, day, hour

and minute by pressing Page Up/Page Down, and set up the

specific date and time by pressing Left and Right.

(5) Set the 485 communication parameters with “5

Commun.” menu.