Technical data
Chapter 5 Human Machine Interface
50
This function will not respond when the inverter is
in operation mode and a “FaultOperated” alarm
interface will be indicated.
(3) “3 Recover” menu, the manufacturer’s parameter
default value can be restored when the inverter is not in
operation mode. Otherwise, a “FaultOperated” will be
prompted.
(4) In “4 ClrErrRecd” menu, history information of the
faults can be cleared. A confirmation is required to clear the
records.
→1 SysPara.
2 Restart
3 Recover
4 ClrErrRecd
GridV.Max(V)
→ 528
GridVmaxTripT (S)
1.80
Pls Input Pwd
****
PwdError
Pls Input Again
GridV.Min(V)
→ 422
GridVminTripT (S)
1.80
GridF.Min(Hz)
→ 59.30
GridFTripT (S)
0.08
Are You Sure?
Recovering..
Success!
Failure!
Are You Sure?
Restarting...
Success!
Failure!
FaultOperated
FaultOperated
Are You Sure?
Sucess!
Figure 5-12 System parameter setup