SDS

Dalton Enterprises, Inc. Product: Crack-Stix
®
Crack & Joint Filler
Phone: [phone] SDS Date: 01/22/2018
Page 3 of 6 Crack-Stix
®
Crack & Joint Filler
Personal Precautions, Protective Equipment and Emergency Procedures: Avoid skin and eye contact,
use proper protective equipment recommended in section 8.
Methods and Materials for Containment and Cleanup: Contain spill and dike with inert material (sand,
sawdust, dirt, etc.). Allow hot material to cool and place in closed container for proper disposal. Avoid
runoff to waterways and sewers. Dispose of in accordance with local regulations.
Section VII – HANDLING AND STORAGE S
Precautions for Safe Handling: Store in a dry area, avoid eye contact and wash thoroughly after handling
Conditions for Safe Storage, Including Incompatibilities: Keep container closed and upright to prevent
leakage. Store in a cool, dry, ventilated area. Avoid heat sources and strong oxidizers.
Section VIII – EXPOSURE CONTROLS / PERSONAL PROTECTION S
Exposure Guidelines
Component
ACGIH TWA (mg/m³)
OSHA PEL (TWA)
(mg/m3)
NIOSH (STEL)/(TWA)
Petroleum Asphalt
0.5 mg/m³
N/A
N/A
Extracts, Petroleum,
Heavy Paraffinic Solvent
5 mg/m³ (Inhalable
Fraction)
5 mg/m³ (Mist)
STEL 10 mg/m³ (mist)
TWA 5 mg/m³ (mist)
Engineering Controls: Use outdoors only. Ensure adequate ventilation.
Individual Protection Measures
Eyes/Face: Safety goggles
Skin: Gloves, long sleeves, protective clothing and footwear
Respiratory: None required if good ventilation is maintained.
Hygienic controls: Wash thoroughly with soap and water before eating or drinking. Wash
contaminated clothing.
Section IX – PHYSICAL AND CHEMICAL PROPERTIES S
Appearance: Black Solid Upper Explosive Limit: N/A
Physical State: Solid below softening point Lower Explosive Limit: N/A
Odor: Asphaltic odor Vapor Pressure: N/A
Odor Threshold: N/A Vapor Density: N/A
pH: N/A Specific Gravity: 1.05-1.9
Melting Point: 150-250° F/65.5-121.1°C Solubility In Water: Negligible
Boiling Point: >600° F/315.6°C Partition Coefficient (n-octanol/water): N/A
Flash Point: > 400 °F/204.4 °C Auto Ignition Temperature: >700° F/371.1°C
Evaporation Rate: N/A Decomposition Temperature: N/A