SDS

Dalton Enterprises, Inc. Product: Gray Crack-Stix
Phone: [phone] SDS Date: 09/11/2020
Page 3 / 5
Section VIII – EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines (T= Total Respirable, R=Respirable fraction, I=Inhalable/aerosol)
Component Name
ACGIH TLV-
TWA (mg/m³)
ACGIH TLV-
STEL (mg/m³)
OSHA PEL-TWA
(mg/ m³)
NIOSH REL
(mg/m³)
Mineral Filler
-
-
(T) 15, (R) 5
(T) 10, (R) 5
Pentaerythritol ester of rosin
-
-
(T) 15, (R) 5
-
Titanium Dioxide
(T) 10
-
(T) 15
-
Distillates, petroleum,
hydrotreated heavy naphthenic
( I ) 5
-
(Mist) 5
(Mist) 5
Engineering Controls: Provide effective general, and when necessary, local exhaust ventilation to draw vapors and
fumes of molten material away from workers to prevent routine inhalation.
Eyes/Face: Safety goggles
Skin: Wear protective heat resistant gloves, aprons, long sleeve shirts and hard sole shoes when heating and/or applying hot
material.
Respiratory: Melting of material should be limited to outside, open areas to ensure exposure limits are not exceeded. Use
NOISH/MSHS approved respirator whenever exposure to fumes or vapors exceed exposure limits.
Hygienic controls: Wash thoroughly with soap and water before eating or drinking. Wash contaminated clothing.
Section IX – PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Gray Solid Upper Explosive Limit: N/A
Physical State: Solid @ Room Temp Lower Explosive Limit: N/A
Odor: Asphaltic odor when heated Vapor Pressure: N/A
Odor Threshold: N/A Vapor Density: Heavier than air
pH: N/A Specific Gravity: 2.5
Melting Point: N/A Solubility in Water: Insoluble
Boiling Point: >640F (>338C) Partition Coefficient (n-octanol/water): N/A
Flash Point: N/A Auto Ignition Temperature: N/A
Evaporation Rate: Slower then N-Butyl Acetate Decomposition Temperature: N/A
Flammability: N/A Max VOC: 0 g/L
Section X – STABILITY AND REACTIVITY
Reactivity: None known under normal conditions
Stability: Stable under normal conditions and usage
Hazardous Reactions: None known under normal conditions
Conditions to Avoid: Strong Oxidizing Agents, Excessive Heat
Incompatible Materials: Strong oxidizers
Hazardous Decomposition Products: Combustion may yield fumes, smoke, carbon monoxide and carbon dioxide.
Section XI – TOXICOLOGICAL INFORMATION
Health Effects
Eye Contact: Serious irritation may result from hot material
Skin Contact: Serious irritation may result from hot material
Ingestion: Serious irritation may result from hot material
Inhalation: Serious irritation may result. Avoid breathing fumes from hot material
Numerical Measures of Toxicity
Component Name
CAS-No.
Oral LD50
Dermal LD50
Inhalation LC50
Mineral Filler
1317-65-3
-
-
-
Pentaerythritol ester of rosin*
8050-26-8
> 2,000 mg/kg (rat)
> 2,000 mg/kg (rabbit)
-