Installation guide

page 2

1. Unpacking Your Fan.

Carefully open the packaging. Remove items from

Styrofoam inserts. Remove motor housing and place on

carpet or Styrofoam to avoid damage to finish. *If

applicable, the four motor stabilization pieces may be

discarded at this time. Do not discard fan carton or

Styrofoam inserts should this fan need to be returned

for repairs.

Check against parts inventory that all parts have been

included.

2. Parts Inventory.

bulb required:

1 x 75 watt max. halogen bulb, type JD E11

(included)

IMPORTANT REMINDER: You must

use the parts provided with this fan for

proper installation and safety.

a. canopy. 1 piece

b. hanging bracket. 1 piece

c. downrod and hanging ball. 1 piece

d. yoke cover. 1 piece

e. motor housing. 1 piece

f. light kit fitter. 1 piece

g. canopy ring. 1 piece

h. blade. 5 pieces

i. glass shade. 1 piece

j. fitter plate. 1 piece

k. hardware packs