Installation guide

2. Parts Inventory.
a. hanging bracket. 1 piece
b. remote control transmitter and plate.
2 separate pieces
c. remote control receiver. 1 piece
d. wall control and plate. 2 separate pieces
e. yoke cover. 1 piece
f. 8in. downrod and hanging ball. 1 piece
g. canopy. 1 piece
h. motor housing. 1 piece
i. blade arm. 5 pieces
j. blade. 5 pieces
k. switch housing plate. 1 piece
l. scroll arm support. 1 piece
m. decorative screw. 6 pieces
(3 pre-attached to motor housing and
3 pre-attached to scroll arm support)
n. switch housing. 1 piece
o. scroll arm. 3 pieces
p. safety cable (already attached to motor).
1 piece
q. canopy cover (in hardware pack). 1 piece
r. hardware packs
page 2
1. Unpacking Your Fan.
Carefully open the packaging. Remove items
from Styrofoam inserts. Remove motor housing
and place on carpet or Styrofoam to avoid
damage to finish. Do not discard fan carton or
Styrofoam inserts should this fan need to be
returned for repairs.
Check against parts inventory that all parts have
been included.
required bulbs:
lighted housing--4 x 15 watt max. candelabra
base bulbs (included)
IMPORTANT REMINDER: You must
use the parts provided with this fan for
proper installation and safety.
w/ remote
w/ wall
control
r
d
k
m
e
f
a
b
c
g
i
n
h
p
j
l
o
11
-
22
-
L1L1 L2L2
q