Installation Guide

USE A LEVEL TO EXTEND (VERTICAL) TRANSFER LINE TO MEET
LEVEL-LINE.
MARKING PANEL AREA
1. EXTEND YOUR (VERTICAL) TRANSFER LINES TO MEET LEVEL LINE.
2. BOTH LEVEL AND TRANSFER LINES MUST BE PERFECTLY LEVEL.
STEP
3
REMOVE ADHESIVE FILM
1. USE A SHARP OBJECT TO LIFT AN EDGE OF THE FILM TAPE.
2. ONCE AN EDGE IS RELEASED FROM THE ADHESIVE, THE FILM WILL PEEL
FROM THE ADHESIVE EASILY.
3. AVOID REMOVING ACTUAL ADHESIVE FROM THE PANEL.
STEP
4