Owner`s manual

THECORRECTWAYTOUSEYOUR

PLANER(SeeFig,2)cont.

4,ALWAYSoperatetheplanerwiththe

chipchuteexhaustturnedsoit points

away from yourface and eyes.

All visitorsshould wear safetyglasses

and be kept a safe distance from the

work area.

5, ALWAYS hold your planer so the

blades DO NOT come in contact with

the workpiece BEFORE you squeeze

the trigger switchand start the planer.

Z_ WARNING: Keep a firm

grip on the tool with both hands at

all times. Failure to do so could

result in loss of control leading to

possible serious injury.

TO ADJUST PLANING DEPTH (See Fig. 3)

The planing depth on yourplaner can be adjusted from 0 to 1/8 inch by rotating

the depth adjustment knob located on the front of your planer,

1. Unplug your planer.

I starting, causing serious injury.

Z_ WARNING: Failure to unplug your planer could result in accidental I

2. To increase cutting depth rotate

knob n a cockwisedirection.

3. To decrease cutting depth, rotate

knob ina counterclockwisedirection,

4. We recommend that you make test

cutsin scrap wood after each

adjustmentto make sure the planer

is removingthe desired amount

of wood.

NOTE: To protect the blades during

storage, transporting and when not

in use, ALWAYS set the blade depth

adjustment to 0.