Owner`s manual

SERVICE
I k WARNING: Preventativemaintenanceperformedby unauthorized
personnel mayresultIn misplacingof Internal wiresandcomponents,which
couldcausea serioushazard.
• All service that requires opening the planer MUST only be performed by a
Seam Service Center. All motor parts represent an important part of the
double insulation system and MUST only be serviced by a Sears Service
Center. Service performed by unqualified personnel could result in a risk of
injury.
• When servicing this tool, ALWAYS use only identical replacement parts.
Follow instructions in the Maintenance Section of this manual Use of
unauthorized parts or failure to follow Maintenance instructions may create a
risk of electrical shock or injury,
• Avoid solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by
their use. Use clean cloths to remove dirt, carbon dust, etc.
GENERAL
I Z_ WARNING: Toavoidaccidents,ALWAYSdisconnectthetcol fromthe
powersourceBEFOREcleaningorperforminganymaintenance.
All parts represent an important part of the double insulation system and shcu d
be serviced only at a Sears Service Center.
I _ WARNING: DONOTat anytime let brake fluids,gasoline,
pelroleum-basedproducts,penetratingoils,etc., comein contactwithplasticparts.
Theycontainchemicalsthat can damage,weakenordestroy plastic.
It is a knownfact that electric tools aresubject to acceleratedwear and
possible premature failure when they are used to work on fiber glass boats and
sports cars, wallboard, speckling compounds or plaster. The chips and
grindings from these materials are highly abrasive to electrical tool parts, such
as bearings, brushes, commutators, etc. Consequently, it is not recommended
that this tool be used for extended work on any fiber glass material, wallboard,
spackling compound, or plaster. During any use on these materials, it is
extremely important that the tool is cleaned frequently by blowing with an air jet.
16