Owner`s manual

LUBRICATION

All ofthe bearings in this tool are lubricatedwith a sufficientamount of

high-gradelubricantforthe lifeof the tool undernormal operatingconditions,

Therefore, no furtherlubricationis required.

I Z_ WARNING: ALWAYSwearsafetygogglesorsafetyglasseswithside Ishieldswhenusingthistoolorblowingdust.Ifoperationisdusty,alsoweara dustmask.

DOUBLE INSULATION

Doubleinsulationis a safrty feature in safety inelectric power tools, that

eliminatesthe need forthe standard3-wire groundedpowercord. All exposed

metal parts are isolatedfrom the internal motorcomponentswith protecting

insulation.Doubleinsulatedtools do not need to be grounded.

EXTENSION CORDS

Sears offersa large selectionof extensioncords that help extendyour working

range.

The use of any extension cord willcause some loss of power. To keep the loss

at a minimum and to preventoverheating, use an extension cord that is heavy

enough to carry the current that the tool willdraw,

A wire gauge (AWG) of at least 14 is recommended for an extension cord 25

feet or less in length. When working outdoors ALWAYS use an extension cord

that is suitable for outdoor use. The cord's jacket will be marked WA.

I Z_ CAUTION: Keepextensioncordsawayfrom thecuttingarea,and position

the cordso itwill not get caughton lumber,tools,etc.duringthe cuttingoperation.

I _ WARNING: Check extension cords before each use. Replace damaged

cords itimmediately. NEVER use a tool with a damaged cord because touching the

damaged area could cause electrical shock, resulting in serious injury.

BLADES

The blades foryour planer are currentlyavailable at your local Sears Store.

I Z_ WARNING: The use of attachments or accessories that are not

recommended may be dangerous.