Use & Care Manual
Ball bearing
* Product you purchased may vary from
picture shown
OPERATOR’S MANUAL
F1976
Sears Brands Management Corporation, Hoffman Estates, IL 60179 USA
SAFETY
DANGER is used to indicate a hazardous situation which,
if not avoided, will result in serious injury or death.
WARNING indicates a hazardous situation which, if not
avoided, could result in serious injury or death.
CAUTION is used to indicate a hazardous situation which, if not
avoided, may result in minor injury, moderate injury, or property
damage.
CAUTION: Read and follow all Safety Rules and Operating
Instructions before rst use of this product.
• Periodically the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
• Auto wax will preserve the unit’s luster nish. Apply the wax as to a
car. The wax will also help protect the unit against scratches.
• Grease and oil can be removed with most standard cleaning uids.
For safety, use a nonammable cleaning uid.
• If drawer liners are supplied, it is recommended they are used
to protect the nish inside the drawers and to make the drawers
easier to clean. The drawer liners may be cleaned with soap and
water.
• For casters, use high quality bearing grease, (yearly).
• Lubricate the slides with grease or equivalent,(twice yearly.)
MAINTENANCE
• Lubricate lock with graphite, (yearly).
CAPACITIES
• The maximum weight for each drawer should be no more than
30 lbs.
• The maximum product weight, including contents, should be
no more than 300 lbs. for each model combination with 3 x 1
inch casters. The maximum product weight, including contents,
should be no more than 500 lbs. for each model combination
with 4 x 2 inch casters.
CALL 1-800-366-7278 FOR SERVICE PARTS. Refer to Service
Parts Drawing for full listing of Service Parts.
LOCATING MODEL # INFORMATION
Model numbers and other information required for service parts is
located on a label on the interior right side of the top most drawer.
DANGER
• DO NOT stand on this product. You may fall, which may cause
personal injury.
• DO NOT step in drawers. You may fall, which may cause personal
injury.
• USE THE BRAKES when not moving this product. This will pre-
vent the product from rolling, which may cause personal injury or
product damage.
• APPROPRIATELY SECURE this product before moving with a
forklift.
• DO NOT tow with power equipment. The product could tip, which
may cause personal injury or prduct damage.
WARNING
• WEAR SAFETY GLASSES when removing or repositioning the
slides. The tool could slip, which may cause personal injury.
• DO NOT mount this product on a truck bed or any other moving
object. This may cause personal injury or product damage.
• DO NOT alter this product in any manner. For example, do not
weld external lockbars or attach electrical equipment. This may
cause personal injury or product damage.
• UNIT MUST BE located on a level surface. The product may be-
come unstable and tip if stored or moved on an un-level surface,
which may cause personal injury or product damage.
• LOCK the drawers before moving this product. The drawers could
come open and make the product unstable and tip, which may
cause personal injury or product damage.
• DO NOT pull this product when moving it. Push the product to
prevent personal injury.
CAUTION
• BE CAREFUL when opening more than one drawer. The product
may become unstable and tip, which may cause personal injury or
product damage.
SERVICE PARTS
STANDARD DUTY TOOL CHESTS