Operator`s manual

Your trim saw has manyfeatures for making your cutting
operations more pleasant and enjoyable. Safety,
performanceand dependability have been giventop
pnodty in the design ofthis trim saw making it easy to
maintain and operate.
j_. WARNING: Do notattemptto usethis productuntil
you read thoroughly and understandcompletelythe
operator'smanual. Pay closeattentionto the safety
rulesincludingDangers,Warningsand Cautions. If
you usethis productproperlyand onlyas intended,
you willenjoyyears of safe, reliableservice.
WARNING: Read and follow all Instructions.
Failureto follow all instructionslistedbelow,may
resultin electricshock, fire and/or seriouspersonal
_njury.
SAVE THESE INSTRUCTIONS
Work Area
• Keep your work area clean and well lit. Cluttered
benches and dark areas invite accident,
• Do not operate power tools in e_plaelve atmo-
spheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while
operating a power tool. Distractions can cause you to
lose control.
Electrical Safety
• Do not abuse the cord. Never use the cord to carry
the charger. Keep cord away from host, oil, sharp
edges, or moving pads. Replace damaged cords
immedistely. Damaged cords may create a fire.
• A battery operated tool with Integral batteries or a
separate battery pack must he recharged only with
the specified charger for the battery. A chargerthat
may be suitablefor one type of battery may create a
riskof fire when usedwithanother battery.Use battery
onlywithcharger listed.
MODEL BA'FFERYPACK CHARGER
315.114260 Item No. S,11375 Item No. _ 11041
(1323517 and 1323903) (1425301)
• Use battery operated tool only wIth specifically
deeignstnd battery pack. Use of any otherbatteries
may createa riskof fire. Use onlywith batterypack
listed.
Personal Safety
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use tool while tired or under the Influence of
drugs, alcohol, or medlcaUon. A momentof inatten-
tionwhile operatingpowertools may resultin serious
personalinjury.
• Dress properly. Do not wear loose clothing or
jewelry. Conteln long hair. Keep your heir, clothing,
and gloves away from moving pads. Looseclothes,
jewelry,orlong hair san be caughtin moving parts.
• Avoid ancldentel starling. Be sure swnch Is In the
locked or off paeltlon before Inserting battery pack.
Carryingtoolswithyour fingeronthe switchor insetting
thebatterypack intoa tool withthe switchon invites
accidents.
• Remove adjusting keys or wrenches before turning
the tool on. A wrenchor a key that isleft attachedto a
rotetingpart of the toolmay result inpersonalinjury.
• Do not overreach. Keep proper footing and balance
st all Umee. Properfooting and balance enable better
control ofthe tool in unexpectedsituations.
• Use safety equipment. Always wear eye protection.
Dust mask, nonskidsafetyshoes, hardhat, or hearing
protectionmustbe usedfor appropriateconditions
Tool Use and Care
• Use clamps or other practical way to secure and
suppatt the workplace to a stable platform. Holding
the work by hand or againstyour bodyis unstableand
may lead to loss ofcontrol.
• Do not force tool. Use the correct tool for your
application. The correct toolwill do thejob betterand
saferat the rate for which itis designed.
• Do not ueatool If switch does not tum it on or off. A
toolthat cannot be controlled withthe switchisdanger-
ousand must be repaired.
• Disconnect battery pack fromtool or placathe
switch In the locked or off pasltlon before making
any adjustments, changing acceeeedee, or storing
tool. Such preventivesafety measures reducethe risk
of startingthetool accidentally,
• Store Idle tools out ofthe reach of children and
other untrained persons. Toolsare dangerousinthe
handsof untrainedusers.
• When battery pack Is not In use, keep It sway from
other metal objects like: paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
3