Operator`s manual

,_ WARNING:Followtheserubswhenusingyour
grinder.
Alwayswearsafetyglassesandkeepguard
inplacewhengrinding.
o Hotmetalsparksfrommetalgrindingcan
causea fire.Avoidsparkcontactwith
flammablematerialssuchas sawdustor
clothing.
o Grindingwheelsmustbefreeof fissuresand
cracks.Fissuresandcrackscancausea
grindingwheeltoshatterresultingin pos-
sibleseriousinjury.
_ DANGER:Neverattachawoodcuttingor
carvingbladeofanytypetothisanglegrinder.It
isonlydesignedforgrindingandsanding.Use
foranyotherpurposeis notrecommendedand
createsa hazard,whichwiiiresultinserious
,_ WARNING: Do not attempt to operate this tool
until you have read thoroughly and understand
completely all instructions, safety rubs, etc.
contained in this manual. Failure to comply can
result in accidents involving fire, electric shock,
or serious personal injury. Save operator's
manual and review frequently for continuing safe
operation, and instructing others who may use
this took
STARTmNG/STOPPmNG GRINDER
See Figure X
Follow these directions when starting and stopping
the grinder.
[] To start grinder: Depress the trigger switch.
[] To stop grindet_ Release the trigger switch.
LOCKING ON
See Figure 7.
Your grinder has a lock-on feature that is convenient
when you operate the grinder continuously for
extended periods of time.
Follow these directions when locking on.
[] To lock-on: Depress the trigger switch, push in the
lock-on button located on the side of the handle,
then while holding the lock-on button in, release
the trigger switch.
[] To release lock: Depress the trigger switch and
release it.
LOCK-ON
BUTTON
TRIGGER
SWITCH
Fig. 7
GRINDING AND SANDING
See Figure 8.
AJways carefully select and use grinding wheels that
are recommended for the material to be ground. Make
sure that the minimum operating speed of any
accessory wheel selected is not less than 11,BOO
RPM The grinding wheel provided with your grinder is
suitable for grinding welds, preparing surfaces to be
welded, grinding structural steel, and grinding
stainless steel
Secure all work before beginning any operation.
Secure small workpieces in a vise or clamp to a
workbench.
_ DANGER: Never use your grinder with the
guard removed. It has been designed for use
only with the guard installed. Attempting to use
grinder with guard removed will result in loose
particles being thrown against the operator
resulting in serious personal injury.
5° to 15°
Fig. 8
12