Operator`s manual

SYMBOL MEANING
• PRIMER BULB
Push primer bulb fully and slowly, 5 to 7 times.
• UNLEADED FUEL
Always use clean, fresh unleaded fuel.
• INDICATES OIL
Refer to operator's manual for the proper type of oil.
A B C • CHOKE CONTROL
B PARTIAL choke position.
C RUN position.
• HOT SURFACE WARNING
Do not touch the engine or muffler. These parts get extremely hot from operation.
When turned off they remain hot for a short time.
• ON/OFF STOP CONTROL
ON / START / RUN
• ON/OFF STOP CONTROL
OFF or STOP
• SHARP BLADE(S)
WARNING: There is a sharp blade on the cutting attachment shield. To prevent serious injury,
do not touch edge. Do not touch the edges of the 44-tooth saw blade. Wear gloves.
• BRUSHCUTTERS - Replace Dull Blade(s)
Do not sharpen the brush blade(s). Sharpening the blade(s) can cause the blade tip to
break off while in use; this can result in severe personal injury.
• TRIMMER/BRUSHCUTTER SAFETY
WARNING: Thrown objects and rotating cutter can cause severe injury. Keep bystanders,
especially children and pets, at least 50 feet (15 m) away from the cutting area. The plastic
cutting attachment shield must be used when using the string head cutting attachment.
-6-