Manual
SYMBOL
I
o@
MEANING
• ON/OFF STOP CONTROL
ON / START / RUN
• ON/OFF STOP CONTROL
OFF or STOP
• THRO'n'LE CONTROL
Indicates "HIGH" or "FASTEST" speed.
• THROTTLE CONTROL
Indicates "IDLE", "LOW" or "SLOWEST" speed.
This unit is vacuum capable and the vacuum attachment
comes with your unit.
Be sure to read and follow all safety, assembly and
operating instructions outlined in this operator's manual.
A
WARNING: Do not use parts, accessories or
attachments not authorized by Craftsman® for
this unit. Doing so could lead to serious injuryto
the user, or damage to the unit, and void your
warranty.
CARTON CONTENTS
• Blower
• Blower Tube
• Operator's Manual
• Bottle of 2-Cycle Engine Oil
• Upper VacuumTube
• Lower Vacuum Tube
• Vacuum Bag
ASSEMBLY INFORMATION
,_ WARNING: If received assembled, ensure
your unit is properly assembled. Make sure all
fasteners are in place and secure.
• No tools are required for assembly
ASSEMBLING UNIT AS A BLOWER
Blower Tube Assembly
WARNING: To prevent serious personal injury,
stop the engine and allow the impeller to stop
before installing or changing tubes,
,_ WARNING: To prevent serious personal injuryor damage to the unit, the blower tube must be
installed while operating this unitas a blower.
NOTE: If the unit was assembled as a vacuum unit,
remove all vacuum parts and store away in a secure
place for later use.
Installing
• Install the blower tube over the blower outlet and
push on untilboth tabs snap into place (Fig. 1).
Removing
• Remove the blower tube by pressing both tabs at the
same time and pulling off the blower (Fig. t).
-6-