Owner`s manual

HOWTOUSEYOURSPRAYER
Determinetheapproximatesquarefootageofthe
areato besprayed.Usethisamountto estimate
thenumberofgallonsthatwillberequired,based
onproductrecommendations.Thiscanhelpavoid
unneededsolutionleftinthetank.
Determinetheapplicationrate(gallonsper1,000
sq.feetorgallonsperacre)basedonthechemical
manufacturersrecommendations.
Usethetipchartonpage9todeterminewhatground
speedwillachievetherecommendedapplicationrate.
Todeterminethethrottlesettingforattainingthe
desiredgroundspeed,markoff100,200and300
feetintervals.Thespeedchartatthebottomof
page9indicatesthenumberof secondsittakesto
travelthesedistances.Setthethrottleand,witha
runningstart,travelthedistancesinthenumberof
secondsindicatedbythespeedchart.Onceyouhave
determinedthethrottleandgearsettingsneeded,
markthethrottlelocationsothatyoucaneasily
resumethesamespeedafterstopping.
Addthechemicalsolutiontothetank,followingthe
productinstructions.
Drivetothestartingplaceforspraying.
Settheboominpositionforspraying.
Setthethrottleatthepositiondeterminedinthe4th
step.Reachbackandflipthepump/motorswitchto
the"ON"positiontostartspraying.
Stayclearofflowers,shrubsandevergreentrees
whensprayingweedcontrolsolutionsto prevent
contactofthesolutionwiththesesensitiveplants.
ATTENTION!
Do not allow chemicals to sit in pump for extended
times of idleness. Some chemicals will damage the
pump valve if allowed to soak untreated for a length
of time. Always flush the pump with water after each
use. See the instructions for cleaning the tank in the
maintenance section for flushing and disposal of
chemicals.
CAUTION: Wear eye protection, gloves
and protective clothing when handling
and working with lawn chemicals.
CUSTOMER RESPONSIBILITIES
Read and follow the maintenance schedule and the maintenance procedures listed in this section.
MAINTENANCE SCHEDULE _¢/__Jf
Fill in dates as you
complete regular service, f._k,_'__,_ '9_
Check for loose fasteners X
Clean tank X
Lubrication X
Service Dates
CHECK FOR LOOSE FASTENERS
Before each use make a thorough visual check of
the sprayer for any bolts and nuts which may have
loosened. Retighten any loose bolts and nuts.
CLEANING TANK
After use, fill the tank part way with water, start the
sprayer and allow clear water to be pumped through
the plumbing system and out through the boom
assembly and the handgun. Use the handgun to
thoroughly wash all internal parts of the tank, the
outside of the tank and the boom.
Refill the tank about half full with plain water and
a chemical neutralizer and repeat the cleaning
instructions above. Flush the entire sprayer with the
neutralizing agent. Follow the chemical manufacturers
instructions for disposal of all wash or rinsing water.
LUBRICATION
Oil the wheels at least once a season.
CLEANING STRAINERS
Periodically clean the strainer in the end of the intake
hose at the bottom of the tank. Remove the nylon
swivel nut from the hose, pull out the screen and flush
it with clear water.
Periodically clean the strainers in the boom nozzles.
Remove the nozzle, pull out the screen and flush it
with clear water.
STORING
Drain all water out of the sprayer, paying special
attention to the pump and handgun. These items
are especially prone to damage from chemicals and
freezing weather.
The sprayer should be winterized before storage by
pumping a 50-50 solution of water and R. V. antifreeze
through the entire plumbing. Proper care and
maintenance will prolong the life of the sprayer.