Operator's Manual CRRFTSMAH° 30" RIDING MOWER SIDE DISCHARGE ELECTRIC START Model No. 917.28001 • Espar_ol, p. 30 This product has a low emission engine which operates differently from previously built engines. Before you start the engine, read and understand this Owner's Manual. IMPORTANT: Read and follow all Safety Rules and Instructions before operating this equipment.
Warranty ................................................. Safety Rules ........................................... Product Specifications ............................ Assembly/Pre-Operation ........................ Operation .............................................. Maintenance Schedule ......................... 2 3 6 7 11 18 Maintenance ......................................... 18 Service and Adjustments ...................... 22 Storage .................................................
DANGER: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. • Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blade when crossing gravel surfaces. • Do not operate machine withoutthe entire grass catcher, discharge chute, or other safety devices in place and working.
Ii. SLOPE OPERATION Iii. CHILDREN Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it. • Mow up and down slopes (15 ° Max), not across. Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity.
• Never fill containers inside a vehicle or on a truck or trailer bed with plastic liner. Always place containers on the ground away from your vehicle when filling. • Removegas-poweredequipmentfromthe truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipmentwitha portablecontainer,rather than from a gasoline dispenser nozzle. • Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete.
PRODUCT SPECIFICATIONS REPAIR PROTECTION AGREEMENTS Congratulations on making a smart purchase. Your new Craftsman® product is designed and manufactured for years of dependable operation. But like all products, it may require repair from time to time. That's when having a Repair Protection Agreement can save you money and aggravation. Gasoline Capacity and Type: 1.5 Gallons Unleaded Regular Oil Type API-SG-SL): SAE 30 (above 32°F) SAE5W-30 (below32°F Oil Capacity: 48 oz.
Steering Wheel Insert Steering Boot Steering (1) 5/16-18 Hex Bolt Steering Shaft Extension (1) Rear Bumper Wheel x4 (1) Lockwasher Steering Wheel (1) Front Bumper __. Steering Shaft Cover (4) Screw #10 x 0.200 (1) Large Flat Adapter (1) Shroud Washer Inq J jJ (2) Key Slope Seat Sheet Your new riding mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes.
TO INSTALL STEERING 1. 2. WHEEL . Slide extension shaft onto steering shaft. Slide steering shaft protective foam cover over steering shaft. Place steering boot over steering shaft and push down to secure. Position front wheels of the riding mower so they are pointing straight forward. Remove steering wheel adapter from steering wheel and slide adapter onto steering shaft. Press steering wheel into position on shaft, install large washer, lock washer, bolt and tighten securely.
TO ATTACH FRONT TO ATTACH BUMPER NOTE: For ease of assembly, you maywish to obtain the assistance of another person for mounting bumper to riding mower. 1. Remove (2) screws from front chassis of riding mower. 2. Tilt the front bumper so that the bumper tabs catch the slots on the front of the chassis and lower the bumper in to place. 3. Attach the bumper to front of chassis with screws removed in step 1. 4. Tighten the two (2) screws securely.
_fCHECKL[ST Before you operate your new riding mower, we wish to assure that you receive the best performance and satisfaction from this Quality Product. Please review the following V" All assembly completed. V" No remaining V" Battery checklist: instructions loose is properly V" Seat is adjusted ened securely. have been parts in carton. connected. comfortably and tight- V" All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).
These symbols may appear on your riding mower Learn and understand their meaning. R N H L REVERSE NEUTRAL HIGH LOW or in literature CHOKE supplied FAST with the product.
KNOW YOUR RIDING MOWER READ YOUR THIS OWNER'S MANUAL RIDING MOWER AND Compare the illustrations with your of various controls and adjustments. SAFETY RULES BEFORE OPERATING riding mower to familiarize yourself with the locations Save this manual for future reference.
SAFETYGLASSES The operation of any riding mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your riding mower or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses. HOW TO USE YOUR RIDING MOWER GROUND • To stop ground drive, depress brake pedal all the way down. • Move motion control leverto neutral position.
TO USE THROTTLE CONTROL • The average lawn should be cut to approximately 2-1/2" during the cool season and to over 3" during hot months. For healthier and better looking lawns, mow often and after moderate growth. • For best cutting performance, grass over 6" in height should be mowed twice. Make the first cut relatively high; the second to desired height. Always operate engine at full speed (fast). • Operating engine at less than full speed (fast) reduces engine's operating efficiency.
Hinge Bracket REVERSE OPERATION SYSTEM (ROS) Your riding mower is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the deck clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position. ,4_,WARNING: Backing up with the deck clutch engaged while mowing is strongly discouraged.
BEFORE STARTING CHECK ENGINE THE ENGINE TO START ENGINE OIL LEVEL When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine. The engine in your riding mower has been shipped, from the factory, already filled with summer weight oil. 1. Check engine oil with riding mower on level ground. 2.
MOWING • • • TIPS Mowershould be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual. The left hand side of mower should used for Drive so onto the Have the mower. distribution cutting. be trimming. that clippings are discharged area that has already been cut.
MAINTENANCE SCHEDULE BEFORE EACH USE EVERY 8 EVERY 25 EVERY 50 EVERY 100 HOURS HOURS HOURS HOURS EVERY SEASON BEFORE STORAGE m R Check Brake Operation _ Check Tire Pressure D Check N_ Check G I_ Operator Presence for Loose Fasteners ChecWReplace Clean Battery O(_ Lubricate Friction Surfaces E Check Mower Levelness R Check V-Belt _4 Oil Level _ Change N Clean Air Filter q_'2 G Clean Air Screen q_#42 E Clean _1_112 Oil Muffler/Spark Engine V" t##'3 E N_ In
RiDiNG MOWER CHECK REVERSE SYSTEM Always observe safety rules when performing any maintenance. BRAKE OPERATION TIRES • Maintain tire pressure at 12 PSI. • Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber. • Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage. NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer.
BATTERY TO CHANGE Your riding mower has a battery charging system which is sufficient for normal use. • Keep battery and connectors clean, • Only recharge battery with charger approved for a 12V 6 amp. hour battery, • Charging with any other charger or an automotive style charger can cause permanent damage to the battery. • Charge battery for 24 hours for a full charge. NOTE: The original equipment battery on your riding mower is maintenance free. Do not attempt to open or remove caps or covers.
AIR FILTER Your engine will not run properly using a dirty air filter. Service air cleaner more often under dusty conditions. See engine manual. CLEAN AIR SCREEN Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed airto remove dirt and stubborn dried gum fibers.
& WARNING: TO AVOID SERIOUS SERVICE OR ADJUSTMENTS: 1. 2. 3. 4. 5. 6. INJURY, BEFORE PERFORMING Depress clutch/brake pedal fully and set parking brake. Place motion control lever in neutral (N) position. Place deck clutch in "DISENGAGED" position. Turn ignition key to "STOP" and remove key. Ensure the blade and all moving parts have completely stopped. Disconnect spark plug wire from spark plug and place wire where come in contact with plug. RIDING MOWER Remove place. pin holding 7.
TO LEVEL MOWER FRONT-TO-BACK ADJUSTM ENT IMPORTANT: Deck must be level side-to side. HOUSING Adjust the mower while riding mower is parked on level ground or driveway. Ensure tires are properly inflated. If tires are over or underinflated, you will not properly adjust your mower.
TO REPLACE BELT MOWER DRIVE MOWER BLADE BELT REMOVAL 1. Park riding mower 2. Set parking brake. 3. 4. Lower mower to its lowest Remove mandrelcoverfrom 5. Remove rear engine 6. Remove rear belt keeper 7. Carefully roll belt over mower blade mandrel. DRIVE TO ADJUST ALIGNMENT position. mowerdeck. from the unit. TO REMOVE unit. top FRONT of the Belt Keeper Idler Pulleys Ma ldrel Remove Check idler pulleys to see that they rotate freely. 10.
REPLACING BATTERY _WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands rings, etc. Positive terminal must be connected first to prevent sparking from accidental grounding. 1. 2. Lift seat pan to raised position. Remove terminal cover. 3. Disconnect BLACK battery cable then RED battery cable, battery strap and carefully remove battery from riding mower. 4.
immediately prepare your riding mower for storage at the end of the season or if the riding mower will not be used for 30 days or more. _,WARNING: Neverstorethe • Empty the fuel tank by starting the engine and letting it run until the fuel lines and carburetor are empty. • Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. • Use fresh fuel next season. riding mower with gasoline in the tank inside a building where fumes may reach an open flame or spark.
TROUBLESHOOTING See appropriate CHART: section in manual unless directed to Sears service center. PROBLEM CAUSE CORRECTION 1 Out of fuel. 1 Fill fuel tank. 2 3 4 Bad spark plug. Dirty air filter. Water in fuel. 2 3 4 5 6 Loose or damaged wiring. Engine valves out of adjustment. 5 6 Replace spark plug. Clean/replace air filter. Empty fuel tank and carburetor, refill tank with fresh gasoline and replace fuel filter. Check all wiring. Contact a Sears or other qualified service center.
TROUBLESHOOTING See appropriate CHART: section in manual unless directed to Sears service center. PROBLEM Poor cut = uneven cutting CAUSE CORRECTION 1 2 Worn, bent or loose blade. Mower deck not level. 1 2 Replace blade. Tighten blade bolt. Level mower deck. 3 Buildup of grass, leaves, and trash under mower. Bent blade mandrel. 3 Clean underside of mower housing. 4 Clogged mower deck vent from build-up of grass, leaves, and trash around mandrel.
/ C_ / / / / ITI U) ..-I m / ocn_z / o_'=o c:: iiiiiiill ,._0 _._ _:_0 _" o _._ o _'=-o & _" 0 _ --_.: N., o_" -h'O _" _ ,.% P _-.
Garant[a ................................................ 30 Reglas de segur[dad ............................. Especff[cac[ones de[ producto .............. Ensamb[ado/Preoperaci6n ................... Operaci6n ............................................. 31 34 35 39 Programa de mantenimiento ................ Manten[miento ...................................... 46 46 Serv[c[o y Ajustes ................................. Almacenamiento ...................................
PELIGRO: Esta Maquina cortadora es capaz de arnputar las rnanosy los pies y de lanzar obje= tos. si no se observan las instrucciones de seguridad siguientes se pueden producir lesiones graves o la muerte. ADVERTENCIA: Con el fin de prevenir un arranque accidental cuando configure, transporte, ajuste o repare la maquina, siempre desconecte el cable de la bujia y coloque el cable donde no pueda entrar en contacto con la bujia.
II. OPERACION III. NINOS EN PENDIENTES Las pendientes son un factor principal que se relaciona con la perdida de control y los accidentes de volcaduras, Io que puede dar como resultado una lesi6n grave o la muerte. La operaci6n en todas las pendientes requiere tener precauciones extras. Si usted no puede retroceder de una pendiente o si se siente inc6modo en la pendiente, no la pode. Pueden ocurrir accidentes tr&gicos si el operador no est& alerta ante la presencia de niflos.
• Nunca Ilene los recipientes adentro de un vehiculo o en un cami6n o trailer con forro de pl&stico. Coloque siempre los recipientes en el suelo y lejos de su vehiculo durante el Ilenado. • Retire el equipo que funciona con gasolina del cami6n o trailer y rellenelo en el suelo. Si esto no es posible, entonces rellene este equipo con un recipiente port&til, en lugar de hacerlo directamente con la boquilla del dispensador de gasolina.
ESPECIFICACIONES DEL PRODUCTO ACUERDOS DE PROTECCION PARA LA REPARACION Capacidad de gasolina y Tipo: 1.5 Gallones (5.6 L) Regular sin plomo Tipo de Aceite (API-SG-S L): SAE 30 (Sobre 32°F/0°C) SAE 5W30 (Deabajo 32° F/0°C Capacidad de aceite: 48 onzas Bujia: Champion RC12YC (Abertura: .030"/0,76 mm) Velocidad de Recarrido: (Mph/Kph) Marcha Adelante: Atr&s: Congratulaciones pot su buena compra.
Inserto del volante de direcci6n Accesorio de transci6n de la direcci6n Volante de direcci6n (1) 5/16-18 x 4 Perno de cabeza (1) Arandela de seguridad (1) Parachoques traseros (1) Parachoques delanteros Cobertura hexagonal (4) Tornillo #10 x 0.
PARA INSTALACION DIRECCION DE COLUMNA DE 1. Deslice el eje de extensi6n direcci6n. 2. Deslice la cubierta de espuma de protecci6n del eje de direcci6n sobre el eje de direcci6n. Coloque el manguito de direcci6n sobre el eje de direcci6n y emp01ejo hacia abajo para asegurarlo. Coloque las ruedas delanteras de la cortadora de cesped de modo que apunten en linea recta hacia adelante. 3. 4. . 7. .
COLOCAClON DELANTERA DE LA DEFENSA NOTA: Para que el armado le resulte sencillo, puede solicitar ayuda a otra persona cuando monte la defensa en la cortadora de cesped. 1. Retire los tornillos (2) del chasis delantro de la cortadora de cesped. 2. Incline la defensa delantera de modo que las pestaflas de la defensa entren en las ranuras del frente del chasis y baje la defensa hacia su lugar. 3. Coloque la defensa en el frente del chasis con los tornillos que retir6 en el paso 1. 4.
CLISTA DE REVISION Antes de operar su nueva cortadora de cesped, deseamos asegurarnos de que usted obtenga el mejor desempe_o y satisfacci6n de este Producto de Calidad. Por favor revise la siguiente lista de revisi6n: ¢" Todas las instrucciones de ensamblaje se han completado. ,/ No queda ninguna parte suelta en la caja de cart6n. ,/ La bateria esta bien conectada. ,/ El asiento est,, ajustado c6modamente apretado. ,/ Todas las Ilantas estan bien infladas.
Estos simbolos pueden aparecer en la cortadora de cesped o en la literatura provista con el producto. Aprenda y entienda su significado.
CONOZCA SU CORTADORA DE CESPED LEA ESTE MANUAL DEL PROPIETARIO RAR SU CORTADORA DE CESPED Y LAS REGLAS DE SEGURIDAD ANTES DE OPE= Compare las ilustraciones con su cortadora de cesped para familiarizarse con las ubicaciones diferentes controles y ajustes. Conserve este manual para futuras consultas. Pedal del freno / Freno de -estacionamiento de los (ROS) en posici6n "on" Palanca del embrague de la ,iltii';iii. ptor de arranque palanca de! elevador.
La operaci6n de cualquier cortadora de cesped puede causar que entren objetos extraflos en los ojos, Io que puede provocar un daflo severo en los mismos. Use siempre lentes de seguridad o protecciones oculares mientras este operando la cortadora de cesped o realizando cualquier ajuste o reparaci6n. Se recomienda usar una careta de seguridad de visi6n amplia sobre los anteojos o lentes de seguridad est_.ndar.
PARA USAR EL CONTROL ACELERAClON DE LA El rango de altura de corte es de aproximadamente 1-1/2 a 4". Las alturas se miden desde el suelo hasta la punta de la cuchilla con el motor sin funcionar. Estas alturas son aproximadas y pueden variar segOn las condiciones del suelo, la altura del cesped y Iostipos de cespedes que se van a cortar. Siempre opere el motor a una aceleraci6n completa. • Si el motor funciona a una velocidad inferior a la m&xima (r&pida), su rendimiento disminuye.
Correa el&stica Coraza del deflector FUNCIONAMIENTO ATRAS Correa elastica Cubierta de la alcochadora Cubierta de la alcochadora (ROS) Su cortadora de cesped est& equipada con un Sistema de Operaci6n en Reversa (SOR). Cualquiet intento pot parte del operador de avanzar en reversa con el embrague de la plataforma activado apagar& el motor, a menos que la Ilave de encendido este en la posici6n de "ENCENDIDO" (ON) del SOR 3. Coloque bisagra. el deflector en la abrazadera 4.
TRANSPORTE &PRECAUCION: Los combustibles mezclados con alcohol (llamados gasohol o que usan etanol o metanol) pueden atraer la humedad, Io que provoca la separaci6n y formaci6n de &cidos durante el almacenamiento. El gas &cido puede daSar e! sistema de combustible de un motor mientras se encuentra en almacenamiento. Para evitar problemas con el motor, el sistema de combustible se debe vaciar antes del almacemaniento durante 30 dias o m&s.
ARRANQUE CON TIEMPO FRiO (50 ° F/10°C Y MENOS) • AI hacer arrancar el motor, mantenga el control de la aceleraci6n a la posici6n de estrangulaci6n hasta que el motor se caliente y empieze funcionar mal. Una vez que empieze a funcionar mal, mueva inmediatamente el control de la aceleraci6n a la posici6n r&pida. El calentamiento del motor puede tomar a partir de varios segundos a varios minutos (cuanto mas fria es la temperatura, m&s largo es el calentamiento).
PROGRAMA DE MANTENiMIENTO C Revisar la operaci6n O Revisar la presi6n TR Revisar la presencia CADA 25 H©RAS CADA 50 H©RAS CADA 100 HORAS CADA TEMPORADA ALMACENAMIENTO J del operador ROS D que los broches RO Revisar/cambiar CADA 8 HORAS del freno de las Ilantas A sistema Revisar ANTES DE CADA USO no esten la cuchilla y el sueltos de la cortadora _3 .
CORTADORA DE ClaSPED Siga siempre las reglas de seguridad realice cualquier mantenimiento. OPERACION DEL • Nunca opere la palanca del embrague de la plataforma a menos que este sentado en el asiento. V#:RIFI#:Z SISTEMA FUNCIONAMIENTO ATRA,S (ROS) • Cuando el motor est& en marcha con el interruptor de Ilave en posici6n de motor "ON" y el embrague del accesorio conectado, cualquier tentativa del operador de viajar marcha atr&s, apagar& el motor.
BATERiA CAMBIO La cortadora de cesped tiene un sistema de carga de la bateria que es suficiente para el uso normal. Determine el rango de temperatura esperado antes de cambiar el aceite. Todo el aceite debe cumplir con la clasificaci6n SG-SL de servicio de API. • AsegOrese de que la cortadora de cesped este sobre una superficie nivelada. • El aceite se drenar& con m&s libertad cuando este tibio. • Mantenga la bateria y los conectores limpios.
FILTRO DEL AIRE Su motor puede sufrir averias y funcionar de manera incorrecta con un filtro del aire sucio. Dele servicio al filtro de aire m&s a menudo si se usa en condiciones polvorosas. Vea la manual de la motor. LiMPIE LA PANTALLA DE AIRE La pantalla de aire se debe mantener libre de suciedad y paja para evitar que el motor se dafle pot sobrecalentamiento. Limpie con un cepillo de alambre o con aire comprimido para retirar la suciedad y las fibras de goma secas dificiles de quitar.
ADVERTENCIA: PARA CUALQUIER SERVlCIO O AJUSTE: 1. 2. 3. 4. 5. 6. DE ClaSPED DE LA CORTADORA LESION SERIA, ANTES DE HACER 6. Retire el pasador que sostiene en su lugar el brazo del eslab6n del elevador de la plataforma. 7. Retire el perno que sostiene en su lugar la varilla de nivelaci6n de lado a lado de la plataforma, Retire la cinta del rededor de las poleas. DE ClaSPED 1. Coloque el embrague de la plataforma posici6n "DESACTIVADO". 2.
NIVELAClON CORTADORA DE LA CARCASA DE CESPED AJUSTE DEL FRENTE A LA PARTE POSTERIOR DE LA IMPORTANTE: La plataforma debe estar nivelada de lado a lado. Ajuste la cortadora de cesped mientras este estacionada en el suelo o en un camino nivelado. AsegQrese de que las Ilantas esten bien infladas (Observe la parte lateral de la Ilanta para verificar que la PSI sea correcta). Si las Ilantas est&n infladas de m&s o de menos, usted no podr& ajustar bien la cortadora de cesped.
CAMBIO DE ClNTA DEL IMPULSOR LA CUCHILLA DE LA CORTADORA CESPED RETIRO DE CINTA DEL IMPULSOR CORTADORA DE CESPED 1. 2. 3. 4. DE DE 2. Coloque la palanca de control de movimiento en la posici6n neutral. Las ruedas traseras deben bloquearse y patinar cuando se intente empujar manualmente la cortadora de cesped hacia adelante. Si las ruedas traseras gJran, se debe dar mantenimiento al freno. Comuniquese con un centro de servicios Sears u otto centro de servicios autorizado.
ARRANQUE DEL MOTOR CON UNA BATERiA DESCARGADA 6. Renistale la abrazadera bateria. 7. Conecte primero el cable ROJO de la bateria en la terminal positiva (+) de la bateria. 8. Conecte el cable de la tierra NEGRO en la terminal negativa (-) de la bateria. PRECAUCI6N: Las baterias de plomo &cido generan gases explosivos. Mantenga los materiales que producen chispas, flamas y humo lejos de las baterias. Use siempre una protecci6n para los ojos cuando este cerca de las baterias.
Prepare de inmediato su cortadora de cesped para almacenarla al final de la temporada o si no Io va a utilizar durante 30 dias o m&s. • Nunca use productos limpiadores para motor o carburador en el tanque de combustible porque puede ocurrir un daflo permanente. _,ADVERTENClA: Nunca almacene la cortadora de cesped con gasolina en el tanque adentro de un edificio donde los humos puedan alcanzar una flama abierta o una chispa. Permita que el motor se enfrie antes de almacenarla en cualquier lugar cerrado.
IDENTiFICACION DE PROBLEMAS: Yea la secci6n apropiada PROBLEMA No para arraRcar El motor no da vueltas que este dirigido Perdida de energia de servicio Sears. CORRECCION No tiene combustible. 1 Llene et tanque de combustible. 2 3 Bujia defectuosa. Filtro de aire sucio. 4 Agua en el combustible. 2 3 4 5 6 Cabteado suetto o daSado. Las v&Ivutas del motor est&n desajustadas. Cambie la bujia. Limpie/cambie et filtro de aire.
IDENTIFICACI6N DE PROBLEMAS: Yea la secci6n apropiada en el manual a menos que este dirigido CAUSA PROBLEMA El motot sigue funcionando cuando el 1 a un centro de servicio Sears. CORRECCION Sistema de control de presencia de seguridad del operador defectuoso. 1 Revise et cabteado, los interruptores 1 Cuchitla desgastada, 1 2 Ptataforma de cortadora de cesped no nivetada. Acumulaci6n de cesped, hojas y basura debajo de la cortadora de cesped. Mandril de cuchilla doblado.
0 0 m n 0 _,_ o S'_, m OO m ::_r _ o-_. Oo C) oo 3 mN Oz _rn _g / / / / o / .
Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME ® (1-800-469-4663) www.sears.com Anytime, day or night (U.S.A. and Canada) www.sears.