Operator's Manual II:RRFTSMRN'I 2.4 VOLT CORDLESS SCREWDRIVER Single Speed / Reversible Model No. 973.112090 Save this manual future reference for • Safety • Features CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Visil the Craftsman web page: www.sears.
• Table Of Contents .......................................................................................................................................................... 2 • Warranty ......................................................................................................................................................................... 2 • GeneralSafety • Features ....................................................................................................................
A Personal WARNING: Read and understand all instructions. Failureto followall instructionslistedbelow,may resultin electdcshock,fire and/or seriouspersonal injury. • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. • Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Tool Use and Care • Ii • • • • Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. Do not force tool. Use the correct tool for your application. The correct tool wUldo the job better and safer at the rate for which it is designed. Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is dangerous and must be repaired.
_k, WARNING: A damaged battery is subject to explosion. To avoid serious personal injury, properly dispose of a damaged battery. • Do not operate charger with a damaged cord or plug. If damaged, have replaced immediately by a qualified serviceman. Following this rule will reduce the risk of eloctdc shock, fire, or serious personal injury. II Save these instructions. This manual contains important safety and operating instructions for charger part number 7221801.
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
_NOWYOUR See Figure SCREWDRIVER ,_ 1. _efore attempting to use your screwdriver, familiarize fourself with all operating features and safety _equirements. WARNING: Do not allow familiarity with your screwdriver to make you careless. Remember that a careless fraction of a second is sufficient to inflictsevere injury. PRODUCT SPECIFICATIONS" SCREWDRIVER I_ : i WARNING: Carefully read throughthis entire operator'smanualbefore usingyournew screwdriver.
,_ WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible sedous injury. CHARGING CHARGER YOUR SCREWDRIVER This tool has been shipped in a low charge condition to prevent possible problems. Therefore, you should charge it overnight prior to use. CHARGERPLUG Note: Batteries will not reach full charge the first time they are charged.
"ADJUSTABLE TORQUE CLUTCH (Tightening Power of Your Screwdriver) See Figure 4. 'When usingyour screwdriver for various driving applications, _t becomes necessary to increase or decrease the power and torque in order to help prevent the possibility of damaging screwheads, threads, workpiece, etc. In general, TO INCREASETORQUE ARROW power and torque should correspond to the difficulty of the _erew to be driven. It torque is too high the screws may be damaged or broken.
Topreserve natural resources, please recycle ordispose of batteries properly. Thisproduct contains nickel-cadmium COVER batteries. Local, state or federal laws may prohibit disposal of nickel-cadmium batteries in ordinary trash. SCREW(S) Consult your local waste authority for information regarding available recycling and/or disposal options. BA'n'ERY CLING REMOVAL, PREPARATION FOR RECY- See Figure 5. BATTERIES TO REMOVE: • • Remove the four screws securing motor housing cover, then remove cover.
CRAFTSMAN ! 2.4 VOLT CORDLESS SCREWDRIVER MODEL NO. 973.112090 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your CORDLESS SCREWDRIVER or when ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS PARTS LIST Key No. PaN Number Description 1 7221801 Charger ............................................................................. 983000-004 Operator's Manual Quan.
For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOME sMAnytime, day or night (1-800-469-4683) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Anytime, day or night www.sears.
