Operator`s manual

Topreservenaturalresources,please

recycleordisposeof batteriesproperly.

Thisproductcontainsnickel-cadmium

batteries. Local, state or federal laws

may prohibit disposal of nickel-cadmium

batteries in ordinary trash.

Consult your local waste authority for information

regarding available recycling and/or disposal options.

BA'n'ERY REMOVAL, PREPARATION FOR RECY-

CLING

See Figure 5.

TO REMOVE:

• Remove the four screws securing motor housing

cover, then remove cover.

• Lift batteries from motor housing enough to expose

leads and battery terminals. Disconnect leads from

battery terminals. Note: Be careful not to break

battery terminals when disconnecting leads.

_1= WARNING: Upon removal, cover the battery

terminals with heavy duty adhesive tape. Do not

attempt to destroy or disassemble batteries or

remove any of its components. Nickel-cadmium

batteries must be recycled or disposed of properly.

Also, never touch both terminals with metal objects

and/or body parts as short circuit may result. Keep

away from children. Failure to comply with these

warnings could result in fire and/or serious injury.

SCREW(S)

BATTERY

TERMINAL

LEADS

COVER

BATTERIES

TERMINAL

MOTOR

HOUSING

The following recommended accessories are currently available at Sears Retail Stores.

• No. 2 Phillips / 8-10 Slotted, 2 Ea. • 7-Pc. Screwdriver Bit Set and Case

• NO. 3 Phillips / 6-8 Slotted, 2 Ea. • 13-Pc. Power Screwdriver/Nutdriver Set and Case

• 5-Pc. Hex Shank Drill Bit Set • 17-Pc. Power Screwdriver/Nutdriver Set and Case

• 6-Pc. Extra Length Magnite Power Bit Set • 30-Pc. Power Screwdriver/Nutdriver Set and Case

,_ WARNING: The use of attachments or accessories not listed might be hazardous.