Full Product Manual

6
ASSEMBLY & USE
ALWAYS use fresh cool water when operating the humidifier.
1.
Remove the top cover from the main body.
2.
Attach the Mist Chamber into the humidifier by placing
the chamber directly over the nebulizer and turn
clockwise to secure the chamber in place. DO NOT
OPERATE THE HUMIDIFIER WITHOUT THE MIST CHAMBER
ATTACHED.
3.
Fill water into the main body. Do NOT exceed the MAX
level mark. Filtered or distilled water is recommended to
avoid white dust if tap water is too hard.
Note: Essential oils may be added to the water.
DO NOT fill water all the way to the rim.
DO NOT use hot water.
DO NOT add any medication or salt.
4.
Place top cover on humidifier base, making sure it fits together securely.
Note: Do not attempt to move the humidifier while full Water. Doing so may cause
leakage of water.
5.
Plug the power cord into a wall socket and turn on the unit by using the Control Buttons.
6.
POWER: Touch the button to turn ON/OFF the humidifier.
1 touch the unit is ON, the mist is HIGH, the indicator light is GREEN
NOTE: The mist chamber must be attached before the unit is turned on.
2 touch the unit if OFF, the light indicator is BLUE
7.
MIST OUTPUT: Touch button to set the mist volume.
Green Light = High Mist
Blue Light = Low Mist
8.
LIGHT: Touch the button to turn the LED light ON/OFF and select light mode.
1 Touch the LED will change colors continually.
2 Touch Keeps the current color on
3 Touch Turns OFF the LED light
Note: Indicator will be Green when the light function is ON and Blue when the lights are
OFF.
9.
SET THE CORRECT HUMIDITY OUTPUT: Adjust the mist output so the mist rises up to be
absorbed by the room air. If mist drops quickly, turn down the mist output to the low
setting.
10.
When the humidifier runs out of water, the Power Indicator will blink red 3 times
and the unit will shut off. This is a safety feature to prevent the humidifier from
possibly overheating and damaging the Nebulizer. Unplug the humidifier before
removing the top and refilling the humidifier.