FXT15 FXT15 Guitar Amplifier with Digital Signal Processing User’s Guide
FXT15 Guitar Amp with Digital Signal Processing Congratulations! You are now the proud owner of the Crate FXT15 Guitar Amplifier. This rugged amplifier features a Clean channel with a three band EQ and Level control, and a Solo channel with our patented FlexWave technology. An easy to operate DSP section lets you dial in a variety of digital effects including reverbs, delays, octave and wah-wahs. A Headphones jack lets you practice in private.
FXT15 Guitar Amp with Digital Signal Processing The Front Panel: 1 2 3 4 5 6 1: INPUT: Use this jack to connect your guitar to the amplifier by means of a shielded instrument cable. SOLO CHANNEL: A high gain channel giving you sounds from a slight edge to serious overdrive. 2: GAIN: Use this control to adjust the amount of distortion for the Solo channel. 3: LEVEL: Use this control to adjust the output level of the Solo channel. 4: SOLO/CLEAN: Use this switch to select the Solo or Clean channel.
FXT15 Guitar Amp with Digital Signal Processing FXT15 TECHNICAL SPECIFICATIONS: Output Power Rating Gain 12W RMS @ 5% THD, 4Ω, 120 VAC Solo Ch 86dB +/-6dB @ 1kHz Clean Ch 46dB +/-6dB @ 1kHz Maximum Input Signal Accepted Tone Controls Signal To Noise Ratio 2.2 volts RMS min.
